Can be applied over solvent-based basecoats and properly prepared paintwork in good condition.
Mixing Ratio
2 parts clearcoat, 1 part hardener, plus 10–20% thinner.
Pot Life
3 hours at 23°C after mixing with hardener.
Spray Gun Tips
Nozzle: 1.3 mm
Conventional: 3.0–3.5 bar (45–50 psi)
HVLP: 2 bar (26–30 psi)
Spray Method
Application viscosity: 16–18 seconds (DIN Cup 4 at 23°C)
Apply 2 to 3 coats, total film thickness of 40–60 μm
Flash-off time between coats: 5–10 minutes at 23°C
Drying Time
At 15°C, the surface is dust-free in 50 minutes and polishable in 12 hours.
At 23°C, it is dust-free in 30–40 minutes and polishable in 6–8 hours.
At 60°C, it is dust-free in 10 minutes and polishable in 30 minutes.
Shelf Life
2 years in unopened containers when stored in cool, dry conditions.
Health and Safety
Refer to the Material Safety Data Sheet (MSDS) for full safety guidance.
Follow all precautionary instructions on the container.
Ensure proper ventilation in the working environment.
*High gloss.
*Excellent durability.
*Scratch resistant with high UV protection.
*Yellowing resistant.
Mixing ratio:
Clearcoat: 2 parts.
Hardener: 1 part.
Thinner: 0.2-0.5 parts.
Pot life:
4 hours @25℃.
Spray gun & air pressure:
Gravity type: 1.2-1.4mm.
Suction type: 1.3-1.5mm.
Spray method:
Spray 2-3 layers, the volatilization time of each layer is 5 to 10 minutes.
Drying time:
| Temperature | Dust free | Drying time for touch | Complete drying time |
| 20℃ | 30 minutes | 2 hours | 12 hours |
| 60℃ | 10 minutes | 20 minutes | 50 minutes |
*Perfect gloss.
*Excellent durability.
*Scratch resistant with high UV protection.
*Yellowing resistant.
Mixing ratio:
Clearcoat: 2 parts.
Hardener: 1 part.
Thinner: 0.2-0.5 parts.
Pot life:
4 hours @25℃.
Spray gun & air pressure:
Gravity type: 1.2-1.4mm.
Suction type: 1.3-1.5mm.
Spray method:
Spray 2-3 layers, the volatilization time of each layer is 5 to 10 minutes.
Drying time:
| Temperature | Dust free | Drying time for touch | Complete drying time |
| 20℃ | 30 minutes | 2 hours | 12 hours |
| 60℃ | 10 minutes | 20 minutes | 50 minutes |
*Quick, time-saving handling.
*Provides excellent flexibility.
*Has fine homogeneous structure.
*Provides very good adhesion and easy, fast filling with no sagging.
Scrape method:
1.Get the substrate sanded and cleaned.
2. Mix the putty with hardener, the mixing ratio is 100:2-3.
3.Apply smooth film immediately after mixing, avoiding air entrapment.
Port life:
3-5 minutes.
Sanding time:
30-40minutes@25℃.
Sanding:
Coarse sand P80-P120, Final sand P180-P240.
Substrate:
Bare steel, primer, aluminium and OEM paints.
Unapplicable substrate:
Corroded steel, plastic.
1K Color Basecoat
*High coverage.
*Easy to mix and match.
*High spreading rate.
*Good adhension and weather resistance.
Mixing ratio:
1K Color Basecoat : Thinner=1 : 0.8-1.2.
Pot life:
4hours@25℃.
Spray gun & air pressure:
Gravity type: 1.2-1.4mm.
Suction type: 1.3-1.5mm.
Spray method:
Spray 2-3 layer, the volatilization time of each layer is 5 to 10 minutes.
Drying time:
Spray the clearcoat after 10-15 minutes.
1K Silver Color Basecoat
*High coverage.
*Easy to mix and match.
*High spreading rate.
*Good adhension and weather resistance.
Mixing ratio:
1K Silver Color Basecoat : Thinner=1 : 0.8-1.2.
Pot life:
4hours@25℃.
Spray gun & air pressure:
Gravity type: 1.2-1.4mm.
Suction type: 1.3-1.5mm.
Spray method:
Spray 2-3 layers, the volatilization time of each layer is 5 to 10 minutes.
Drying time:
Spray the clearcoat after 10-15 minutes.
1K Pearl Color Basecoat
*High coverage.
*Easy to mix and match.
*High spreading rate.
*Good adhension and weather resistance.
Mixing ratio:
1K Pearl Color Basecoat : Thinner=1 : 0.8-1.2.
Pot life:
4hours@25℃.
Spray gun & air pressure:
Gravity type: 1.2-1.4mm.
Suction type: 1.3-1.5mm.
Spray method:
Spray 2-3 layers, the volatilization time of each layer is 5 to 10 minutes.
Drying time:
Spray the clearcoat after 10-15 minutes.
2K Solid Topcoat
*High coverage.
*Easy to mix and match.
*High spreading rate.
*Good adhension, excellent durability and weather resistance.
Mixing ratio:
2K Solid Topcoat: 2 parts.
Hardener: 1 part.
Thinner: 0.2-0.5 parts.
Pot life:
4hours@25℃.
Spray gun & air pressure:
Gravity type: 1.2-1.4mm.
Suction type: 1.3-1.5mm.
Spray method:
Spray 2-3 layers, the volatilization time of each layer is 5 to 10 minutes.
Drying time:
In 25℃, 30 minutes for dust free, 1 hour for touch, 12 hours for sanding.
In 60℃, 10 minutes for dust free, 20 minutes for touch, 50 minutes for sanding.
EN
ES